The purpose of this project to remove four (4) existing wind cones located at the north and south ends of airfield at Charlotte Douglas International Airport and install four (4) new wind cones, provided by the Airport. Contractor is responsible to maintain a safe and clean operation and for security of all material and equipment while on site. Contractor is responsible to repair any items damage caused by work performed while on site. All staff assigned to project are required to be badge in accordance with airport security policy. Staff must properly display badge at all time, on the upper part of body visual to security and official members of the Airport. Any loss, damaged or stolen badges MUST be reported immediately to your airport contract.
On-Call Airfield Lighting Maintenance
The Facilities Department of Charlotte Douglas International Airport maintains the airfield, including runways and taxiways and the lights, signs, regulators, and control systems within the AOA. (Aircraft Operational Area). This includes a network of wire and conduit, including cans and manholes. This Contract will be an on-call as-needed basis. It will also include, not be limited to the following: power, distribution, lighting, conduit, panels, equipment connections, and high voltage. Most of this work will be in and on the airfield at Charlotte Douglas International Airport.
Cummins Engine Repair Service
CATS BOD (Bus Operations Department) is seeking an authorized vendor that can provide vehicle repair services for Cummins engines. The vendor must guarantee workmanship and honor warranty of the components replaced. The repair services of the Cummins engines shall include but not be limited to; diagnostics, routine repairs, and replacement of all mechanical engine components and accessories, all sensors on the engine or vehicle that could cause an engine fault code, and any wiring and harnesses that could cause an engine fault code. The contract will include the selling CATS the licenses of Cummins Insite (Pro and Basic) annually. In addition the contract will include selling CATS a subscription to Cummins QuickServe Online. This will allow the addition of new employees to the CATS subscription and have their own service training IDs.
PSR 1078
Rail Tool Calibration
Requesting a solicitation for Rail Maintenance and Maintenance Wayside equipment calibration. Seeking competitive proposals from accredited calibration service’s to provide repair and calibration services for test and measurement equipment. It is the desire of CATS Rail Operations to partner with multiple vendors for these services.
Calibration of tools and equipment is a necessary part of the quality control process for CATS Rail Operations for proper maintenance of our railcars and rail infrastructure. Tools that have exceeded their calibration due date are taken out of rotation and noted as past the calibration due date.
CATS Rail Operations is governed by our own internal calibration policy which is largely based on APTA standards. In compliance with our calibration policy, CATS Rail Operations sends out equipment throughout the year for calibration and/or repair utilizing various vendors and annually hosts an onsite calibration.
PSR 912
Fire Extinguisher Products and Services
Charlotte Water will be issuing an RFQ to help meet Charlotte Water’s needs with regard to fire equipment, maintenance, training, and inspection services.
Golf Village restoration service
Charlotte Water is seeking a company to provide restoration service to Golf Village’s driving range, located in South Charlotte. Charlotte Water acquired an easement diagonally across Golf Village driving range for the Steele Creek Pumping Station Replacement project. The project included a force main, which was installed across the property in 2017. The driving range is nearly completely flat, has an uneven grade that blocks drainage, causing large puddles to form after rain. Several attempts to remedy this situation have not been successful.
A company will need specialized equipment such as laser-guided construction equipment for grading the driving range to allow for even drainage, 3-5 years experience in restoring a golf course driving range, obtaining all permits, etc.
CATS Facilities Air Compressor Service and Bus Air Compressor PM – Repair Contract
Contract needed for Air Compressor Service and Bus Air Compressor Repair – Periodical Maintenance. Maintenance and repair services for four (4) dryers and four (4) air compressors and service for 8 buses . The scope of work shall be at a minimum the performance of basic service to all compressors and air dryers every three months, and to also perform basic services to all compressors and air dryers on an annual basis.
PSR 805
PSR 1071
Condenser Water Loop System – Concourse E- Phase 9 – Sycamore Brewing & PDQ
The purpose of this contract is to build a complete Condenser Water Loop as designed by AME Consulting Engineers. The system will be designed using a shell and tube heat exchanger connected to the Airport’s Central Chiller Plant, chilled water piping, to provide tempered condenser water for the food concessions, water-cooled, condensing units on walk-in cooler and freezers. Contract term 90 days.
Vacant Parcel / Brush mowing
Provide Brush mow maintenance of city owned parcels, trash removal, minor trimming, landscaping and similar work. The work covered by this project consists of all labor, equipment and performing of all operations necessary to bush hog and otherwise maintain vacant land, fields, drainage areas or otherwise unoccupied land. Work may occur around areas with buildings to
be demolished, construction areas, vacated parking lots, road shoulders or other areas that may present unique hazards. Areas may be sloped, rough terrain or flat ground. Contractor is required to provide all safety operations such as lane closures, signage or similar to create a safe work zone for their staff and limit impacts to traffic or operations around the site. All lane closures will be coordinated in advance with airport representative.