The City of Charlotte is interested in obtaining solicitations for Electronic Waste Management Services consisting of handling,  transportation, destruction, disposal and recycling of Electronic Waste Materials. Electronic Waste Materials shall include, but not limited to the following:
• Television Sets;
• Computer Processing Units and related equipment;
• Servers:
• Monitors;
• Keyboards;
• Printers (including all ink and toner cartridges);
• Copiers;
• Scanners;
• CD-ROMs;
• Dumb terminals;
• Mouse pads;
• Computer cables;
• Typewriters;
• Battery supplies;
• Cables, Cards and Power Supplies;
• Speakers and related equipment;
• Fax machines;
• VCR and DVD equipment;
• Stereos and related equipment;
• Cameras and related equipment;
• Projection equipment;
• Headphones; and
• Assemblies

The purpose of this project is to improve traffic flow on North Tryon Street by extending the left turn lane. This project will include lane widening, drainage and pavement markings.

The purpose of this Request for Proposal (RFP) is to solicit proposals from qualified vendors to provide an On-Duty Scheduling Software System for the Charlotte-Mecklenburg Police Department. The system will be used to schedule, manage, and track law enforcement officers’ shifts, ensuring optimal staffing, and compliance with operational needs. The software will be user-friendly, secure, and scalable, with features that streamline scheduling processes and improve overall efficiency in workforce management.

This project is to perform landscape maintenance in zones two and three within the campus of Charlotte Douglas International Airport.  Zone 2 is primarily made up of areas along Billy Graham Parkway and the airport’s parking lots.  Zone 3 is primarily made up of areas along Wallace Neal Rd., ARFF Rd., West Blvd., and Piper Lane.  The daily and weekly tasks include mowing, edging, spraying, trash pickup, pruning, and mulching. These areas are to be clean and manicured to present aesthetically pleasing appearance to the public.

The Matheson to Craighead segment of the Cross Charlotte Trail will implement a 14-foot shared use path beginning at E 36th Street. The path will continue down Cullman Ave and board walk up into a pedestrian bridge spanning the Norfolk Southern Railroad tracks utilizing a prefabricated structure within railroad right of way. The structure will then connect to the existing trail built by Brand Properties within the Kaleido Noda apartment complex.

July 2025 Update: This project will not go out for public bid; it is now being designed and constructed through a reimbursement agreement with a private developer. 

Firehouse 44 will be an integral asset to support Charlotte Fire Department’s efficient response to emergencies in the community; providing a location within the newly developed River District community and expanding their response area in this newly incorporated region of Charlotte. This 14,600 SF, two-story, 3-bay facility will be the first mass timber firehouse in the Southeast US and will meet Living Future’s (LF) Zero Carbon certification for total project embodied carbon. The project will comply with Charlotte’s Sustainable Facilities Policy and fully support the sophisticated and time-sensitive operations of the Fire Department.

The Charlotte Area Transit System (CATS) anticipates contracting out the following work:

The CTC Fare Zone Striping project is a part off safety and security improvements at the Charlotte Transportation Center that will include the installation of the following approximate quantities of heated-in-place thermoplastic markings:
-950 linear feet of customized 2′-wide blue striping labeled with “FARE ZONE”;
-470 linear feet of pedestrian crosswalk (8 separate crosswalks); and
-920 linear feet of safety yellow striping for 23 bus bays.
Other additional work includes the installation of 31 yellow truncated domes, removal of existing crosswalk striping, and providing 121 linear feet of additional blue “FARE ZONE” striping to be turned over to CATS.

Heat-in-place thermoplastic will be installed per NCDOT specifications. The crosswalk and truncated dome will match the City of Charlotte Land Development Standards.

PSR # 1917

This project will address the non-conforming, physical ADA barriers to the greatest extent feasible and where applicable under code provisions. Phase 2 includes the Charlotte-Mecklenburg Government Center and adjacent Parking Garage.  Scope areas include Exterior Plaza, Entrance Lobby, 2nd Floor Mezzanine and the 15-story Highrise. Specific scope includes, but is not limited to, Partitions, Doors and Door Hardware, Ramps, Millwork, Restrooms, Controlled Access, Obstructions, Plaza Deck and Accessible Routes. The project delivery method is Construction Manager at Risk (CMAR).  The CMAR will commence with CBI outreach ~3rd qtr 2025 and trade partner pre-qualification ~4th qtr 2025.

The City of Charlotte is seeking a qualified provider of Heavy Duty Refuse Truck and Street Sweeper Body Repair Services to work in conjunction with Fleet Management. The Company shall perform maintenance, and repair services on fleet street sweeper truck equipment owned, operated, or maintained by the City.

The City of Charlotte Department of Transportation (CDOT) is seeking proposals from qualified vendors to provide advanced detection technology and assist with its installation at designated intersections. This effort supports a comparative analysis to identify the most suitable detection solution for the City. The selected detection systems must reliably identify all roadway users, including vehicles, pedestrians, cyclists, and scooters.

Participating vendors will engage in a field evaluation and must provide all necessary equipment, software, and installation assistance. The City intends to award a three-year contract with two optional one-year renewals, for a total potential term of five years. Evaluation criteria include detection capabilities, ease of installation and maintenance, technical compliance, feature set, data quality, experience, and cost competitiveness.

The City of Charlotte requires a qualified heavy equipment dealer and general service provider to work in conjunction with the Fleet Management Division to support the city’s fleet comprising various makes, model years and commercial truck classifications. The services for this requirement include but are not limited to repair, replacement, maintenance, diagnostic, warranty repair and representation related services for heavy trucks with classifications ranging from 6-8.

The City is seeking a qualified provider for Vehicle and Equipment Graphics Manufacturing, Application, Removal, Inventory Management and Related Services